3M PPS Series 2.0 Kits, Standard, 650 ml, 125 Micron Box of 50

Additional Information

The 3M PPS Series 2.0 Standard Kit represents the next generation of paint preparation technology for high-throughput body shops. Manufacturers engineered this closed fluid delivery system to eliminate the need for traditional separate mixing cups and paper paint strainers. Consequently, technicians can mix their coatings directly inside the cup liner, lock the lid in place, and begin spraying immediately to maximize booth productivity.

Advanced Contamination Protection and 360° Spraying

This spray cup system utilizes a full-diameter, integrated 125-micron nylon filter inside every disposable lid to trap tiny dust particles and paint flakes before they hit your panel. Specifically, the secure quarter-turn lid locking system helps reduce paint build-up and possible joint contamination. Because the flexible liner collapses smoothly as you pull the trigger, it allows the spray gun to function perfectly at any angle—even completely upside down. To understand workplace safety regulations and protective clothing benchmarks during vehicle refinishing cycles, you should explore the HSE Motor Vehicle Repair paint spraying documentation for official safety frameworks.

Product Specifications & Kit Contents

• Product Name: 3M™ PPS™ Series 2.0 Spray Cup System Standard Kit

• Part Number: 26026

• Cup Size: Standard (650 ml capacity — excellent for 3-panel repairs)

• Filter Size: 125 Micron Fine Mesh (Nylon 6 construction)

• Lids Included: 50 Disposable Lids with Integrated Locking Collars

• Liners Included: 50 Disposable LDPE Liners

• Hard Cups Included: 1 Reusable Rigid Cup with Mix Graduations

• Sealing Plugs: 32 Wide-Base Sealing Plugs for temporary coating storage

• Compatibility: Requires 3M™ PPS™ Series 2.0 Adapters for spray gun connection

Key Performance Benefits for Paint Refinishing Crews

Maximized Material and Solvent Savings The primary financial benefit of the PPS 2.0 system is its ability to lower operating costs across your entire paint department. Therefore, your team can mix smaller, more precise batches of basecoats or clearcoats without leaving expensive fluid sitting in the bottom of a traditional suction pot. Furthermore, because the paint only travels through the disposable lid and adapter, cleaning the spray gun requires only a fraction of the solvent typically needed. Consequently, this reduction in wash cycles actively lowers your shop's VOC emissions and protects operators from unnecessary chemical exposure.

Improved Ergonomics and Easy Refills 3M designers updated the reusable hard cups by adding cut-out clear windows along the sides. Specifically, these access slots allow the painter to view the remaining paint volume easily and hold the liner firmly while twisting off the lid during refills. Because the wide-base sealing plugs allow you to store leftover paint upside down, the filter mesh stays wet between coat intervals, preventing dried paint scales from clogging the tip later. Interrupted fluid flow rate, which helps prevent paint sputtering or dry patches. Because the closed system blocks outside dirt from settling into the cup while moving around the booth, the number of surface imperfections drops dramatically. Therefore, your cars leave the booth with fewer dust nibs, minimizing the time required for denibbing, wet sanding, and polishing. This reliable processing loop makes the box of 50 Standard Kits a highly profitable asset for any modern collision center.