Anest Iwata AZ3 HTE2 AV 2.0mm Gravity Spray gun with 600cc Cup

Additional Information

The Anest Iwata AZ3 HTE2 AV 2.0mm represents an essential asset for automotive bodyshops and industrial coaters who require maximum fluid throughput without sacrificing surface uniformity. Manufacturers re-engineered this Series 2 model to feature a lighter body and a refined air distribution system. Consequently, the user can spray heavy high-build primers, sprayable fillers, and thick undercoats with total consistency, reducing the risk of pinholes or deep sanding textures.

^

High Transfer Efficiency for Viscous Coatings

This spray gun utilizes Air Gunsa HTE (High Transfer Efficiency) technology to deliver a highly effective, controlled fan pattern. Specifically, the internal fluid dynamics ensure that dense materials are broken down evenly across a wide fan width, which effectively prevents heavy material piling or dry edges. Because the gravity-fed configuration draws paint downward into the stainless steel fluid block with zero resistance, it eliminates the feed-stalling common with suction setups. To understand the statutory obligations regarding overspray reductions and emissions compliance in professional spray booths, you can consult the HSE Motor Vehicle Repair guide on paint spraying and health protection for official safety benchmarks.

^

Product Specifications

• Product Name: Anest Iwata Air Gunsa AZ3 HTE2 AV

• Nozzle Size: 2.0mm (Ideal for high-build primers and structural fillers)

• Air Control: Integrated Airflow Valve (AV Control Handle)

• Cup Capacity: 600cc Heavy-Duty Akulon Cup (Multi-Thread Design)

• Air Consumption: 205 Nl/min (approx. 7.2 CFM)

• Recommended Inlet Pressure: 2.0 bar (29 psi)

• Fluid Output: 265 ml/min

• Fan Pattern Width: 310mm

• Body Weight: 517g (Gun only — 20-50g lighter than previous generations)

• Fluid Passages: Corrosion-Resistant Stainless Steel (Waterborne & Solvent compatible)

^

Key Performance Benefits for Prep Technicians

Granular Handle Airflow Adjustment The standout feature of this specific AZ3 model is the integrated AV airflow control valve positioned right at the base of the gun handle. Therefore, the prep technician can adjust the incoming line pressure instantly to compensate for fluctuating compressor delivery or changing material thicknesses. Furthermore, this precise micro-regulation prevents dry spraying and helps lay down a flatter primer film. Consequently, the cured panel requires significantly less block sanding, which saves your shop precious labor hours and lowers your abrasive consumption.

Ergonomic Remodelling for Reduced Strain Iwata engineers re-designed the gun body to optimize balancing and lower user fatigue during long prepping shifts. Specifically, the ergonomic handle contours and responsive trigger actions distribute the weight of a full 600cc paint pot evenly across the operator's hand. Because the tool minimizes vibration and trigger pull resistance, it helps protect painters from repetitive strain injuries. Furthermore, you can find corresponding maintenance components or replace worn parts by sourcing your genuine Anest Iwata AZ3 HTE2 spray gun kits directly from Q-Paints, keeping your preparation area running at full factory specifications.

High-Grade Chrome Body and Rapid Cleanup The AZ3 HTE2 features a mirror-polished chrome finish that actively resists paint adhesion, making cleanup quick and simple. Specialty gun washes allow the user to clear away heavy primer residue from the exterior and fluid passages in seconds. Furthermore, the stainless steel internal thread connections ensure that water-based primers will not cause premature corrosion or needle binding. This structural durability makes the gun an exceptionally cost-effective, long-term asset for busy commercial repair facilities.